Korea Fire Institute of Industry & Technology
  • product Products List
    • home Home >
    • Pdoduct >
    • Products List
  • list image

  • ZPEL-911
    *Introduction* A ZION portable emergency lighting lamp device can be easily found and used in case of a blackout caused by fires or natural disasters. The lamp can be easily found in darkness because of a photoluminesent master batch that emits light when a blackout occurs. As the lamp has no switches, users can safely and correctly use it. Its light source consists of 7 LEDs and provides safe brightness necessary in emergencies. As it consumes little power, it can be used for a long time. A component for checking the battery and a test switch for confirming the operation of the product are located on the front side and improve its reliability and thus helps protects lives in disaster situations. A buzzer that sounds simultaneously with the starting of the emergency lamp guides refugees and is effective for preventing the product from being stolen. *Specifications* Shelf life : more than 5years Running time : more than 24urs(50Lux) Low battery warning Led Function & easy check Non switch type Auto run at under 5Lux or upper 40℃ degree Super bright 7-LED cluster Easy installation Dimensions :
    go to inquiry
  • list image

  • USEN-200
    A built-in sensor that detects the movement of people in ark places, the light is automatically turned on/ off on about 30 seconds without any additional switch operation. In particular, Unisensor is an emergency lighting functional sensor that detects power and power outage, and lights up immediately with internal battery to quickly find the exist in case of fire.
    go to inquiry
  • list image

  • ULED-12SM
    LED 55W / Can be used as emergency light / 60 minutes / M Bar (1200x300) ■ LED lamp has high color rendition, making it effective for quickly finding escape routes in case of fire caused by disasters. ■ Compared to other lighting equipment, it has high energy efficiency, and has 40 times longer life compared to fluorescent light, resulting in over 30 reduction in energy consumption. ■ Environmentally friendly emergency light does not contain mercury or other toxins and emits low UV and infrared ray will suppress aging of exhibits and penetration by bugs. ■ Independent technology of Union Light Co., Ltd. has minimized light emission to the minimum no preheating time is necessary, and thereis no flickering when light is turned on (instant- on lighting), protecting eyesight. ■ Reduction in construction cost: All-in- one LED down light can be installed in areas with low ceilings or in confined areas. Eco nomical product will reduce construction cost due to its easy installation. Product features 1.This product can be used as general lighting in normal situations, with immediate switch into emergency light in case of power failure and emergency, to be lighted up to 2 hours. 2.All in one construction of emergency lighting circuit on the top section of the light makes installation easy. 3.When switched into emergency light, the intensity is about 90 that of general lighting, preventing physical anxiety in case of change in light intensity when there is power failure caused by fire. People can deal with the emergency situation calmly. 4.Charging circuit is designed to prevent
    go to inquiry
  • list image

  • ULED-12ST
    LED 55W / Can be used as emergency light / 60 minutes / T Bar (1200x300) ■ LED lamp has high color rendition, making it effective for quickly finding escape routes in case of fire caused by disasters. ■ Compared to other lighting equipment, it has high energy efficiency, and has 40 times longer life compared to fluorescent light, resulting in over 30 reduction in energy consumption. ■ Environmentally friendly emergency light does not contain mercury or other toxins and emits low UV and infrared ray will suppress aging of exhibits and penetration by bugs. ■ Independent technology of Union Light Co., Ltd. has minimized light emission to the minimum no preheating time is necessary, and there is no flickering when light is turned on (instant-on lighting), protecting eyesight. ■ Reduction in construction cost: All-in-one LED down light can be installed in areas with low ceilings or in confined areas. Eco nomical product will reduce construction cost due to its easy installation. Product features 1.This product can be used as general lighting in normal situations, with immediate switch into emergency light in case of power failure and emergency, to be lighted up to 2 hours. 2.All in one construction of emergency lighting circuit on the top section of the light makes installation easy. 3.When switched into emergency light, the intensity is about 90 that of general lighting, preventing physical anxiety in case of change in light intensity when there is power failure caused by fire. People can deal with the emergency situation calmly. 4.Charging circuit is designed to prevent
    go to inquiry
  • list image

  • ULED-6SM
    LED 55W / Can be used as emergency light / 60 minutes / M Bar ■ LED lamp has high color rendition, making it effective for quickly finding escape routes in case of fire caused by disasters. ■ Compared to other lighting equipment, it has high energy efficiency, and has 40 times longer life compared to fluorescent light, resulting in over 30 reduction in energy consumption. ■ Environmentally friendly emergency light does not contain mercury or other toxins and emits low UV and infrared ray will suppress aging of exhibits and penetration by bugs. ■ Independent technology of Union Light Co., Ltd. has minimized light emission to the minimum no preheating time is necessary, and there is no flickering when light is turned on (instant- on lighting), protecting eyesight. ■ Reduction in construction cost: All-in- one LED down light can be installed in areas with low ceilings or in confined areas. Eco nomical product will reduce construction cost due to its easy installation. Product features 1.This product can be used as general lighting in normal situations, with immediate switch into emergency light in case of power failure and emergency, to be lighted up to 2 hours. 2.All in one construction of emergency lighting circuit on the top section of the light makes installation easy. 3.When switched into emergency light, the intensity is about 90 that of general lighting, preventing physical anxiety in case of change in light intensity when there is power failure caused by fire. People can deal with the emergency situation calmly. 4.Charging circuit is designed to prevent
    go to inquiry
  • list image

  • ULED-6ST
    LED 50W / Can be used as emergency light / 60 minutes / T Bar ■ LED lamp has high color rendition, making it effective for quickly finding escape routes in case of fire caused by disasters. ■ Compared to other lighting equipment, it has high energy efficiency, and has 40 times longer life compared to fluorescent light, resulting in over 30 reduction in energy consumption. ■ Environmentally friendly emergency light does not contain mercury or other toxins and emits low UV and infrared ray will suppress aging of exhibits and penetration by bugs. ■ Independent technology of Union Light Co., Ltd. has minimized light emission to the minimum no preheating time is necessary, and there is no flickering when light is turned on (instant- on lighting), protecting eyesight. ■ Reduction in construction cost: All-in-one LED down light can be installed in areas with low ceilings or in confined areas. Eco nomical product will reduce construction cost due to its easy installation. Product features 1.This product can be used as general lighting in normal situations, with immediate switch into emergency light in case of power failure and emergency, to be lighted up to 2 hours. 2.All in one construction of emergency lighting circuit on the top section of the light makes installation easy. 3.When switched into emergency light, the intensity is about 90 that of general lighting, preventing physical anxiety in case of change in light intensity when there is power failure caused by fire. People can deal with the emergency situation calmly. 4.Charging circuit is designed to prevent
    go to inquiry
  • list image

  • ULED-20
    LED / For attachment on ceiling or wall Dispersion 2W / Dispersion 2W: 120 minutes 1. Immediate automatic lighting through internal circuit detection during power failure or emergencies. 2. Operation confirmation switch: Pressing the test switch will confirm normal operation. 3. Adjustment of lamp angle: Head can be adjusted top, bottom, left, and right according to the structure of the building 4. Battery protection circuit: Overcharge prevention circuit design 5. Recharge input power: AC220V(60Hz)
    go to inquiry
  • list image

  • ULED-10
    LED / Low-cost 1W×2EA : 60 minutes 1. Immediate automatic lighting through internal circuit detection during power failure or emergencies. 2. Operation confirmation switch: Pressing the test switch will confirm normal operation. 3. Adjustment of lamp angle: Head can be adjusted top, bottom, left, and right according to the structure of the building 4. Battery protection circuit: Overcharge prevention circuit design 5. Recharge input pow
    go to inquiry
  • list image

  • ULED-200
    High luminous intensity LED / Attachable Concentration 4W / Concentration 4W: 60 minutes 1. Immediate automatic lighting through internal circuit detection during power failure or emergencies. 2. Operation confirmation switch: Pressing the test switch will confirm normal operation. 3. Adjustment of lamp angle: Head can be adjusted top, bottom, left, and right according to the structure of the building 4. Battery protection circuit: Overcharge prevention circuit design 5. Recharge input power: AC220V(60Hz)
    go to inquiry
  • list image

  • ULED-100
    Long hour LED / Attachable Dispersion 2W / Dispersion 2W: 120 minutes 1. Immediate automatic lighting through internal circuit detection during power failure or emergencies. 2. Operation confirmation switch: Pressing the test switch will confirm normal operation. 3. Adjustment of lamp angle: Head can be adjusted top, bottom, left, and right according to the structure of the building 4. Battery protection circuit: Overcharge prevention circuit design 5. Recharge input power: AC220V(60Hz)
    go to inquiry
  • go list