Korea Fire Institute of Industry & Technology
  • product Products List
    • home Home >
    • Pdoduct >
    • Products List
  • list image

  • Pressure control switch
    Digital pressure switches have remedied its shortcomings that pressure chambers have difficulties in detailed setting. Digital pressure switches also can prevent water hammers and are excellent substitutes of pressure chambers. *Detailed setting of operation and stop points are possible(up to a second decimal place) * Minimize the place for installation * Terminating resistors are built and no need for a pressure gauge as discharge of pumps are shown * DC24V is needed * One device can control four pumps and easy to install and maintain * Pumps are operated in a consecutive order.
    go to inquiry
  • list image

  • Network(IP) Camera integrated Ultraviolet Flame Detector
    UV Flame Detector ? IP CCTV can most rapidly detect the fire among the other flame detectors by perceiving UV wavelength with separative UV sensor, which t he fire generates. Equipped with 2.0 megapixel HD-IP camera, anyone can notic e the moment the fire and can check the circumstances before and after the fir e at control room or with supervisor’s smartphone. Then you can figure out th e reason of fire. Using the motion sensor, you can monitor the invasion of others and the site w hich might be dangerous or lonesome. So, you can prevent the secondary accid ent and it is also cost-effective on personnel. Because currently existing CCTV o n site has low-definition, it is hard to make decision correct about the accident a nd it is needed certain equipment to forward the video. But our product overco me these disadvantages through high-definition and the Internet. These can be applied with maximum function in industrial site such as chemistr y laboratory, dangerous article processing office, various test room, and coal m oving rail and other public places such as hallway, lobby or parking lot of the bu ilding and traditional market.
    go to inquiry
  • list image

  • Ultraviolet and Infrared Hybrid Flame Detector 02
    There are two wavelength from UV and IR which is generated when the fire occ urs. If both sensors detect the wavelength, it means the fire breaks out then th e product’s transmitter forwards the signal and alarm. There are many factors w hich looks like the fire such as welding, halogen lamp, heat from stove and flam e of grinder. This product can choose whether the signal is real or not and mak e the fire surveillance more correct. Those are functions of 1st generation Flame Detector. 3rd generation Flame Det ector is release currently. With visible light sensor, high quality digital Light Lux feature(automated brightness control) and embedded high quality digital tempe rature sensor(in case of malfunction in high-temperature area), the monitoring area is enlarged to 30m distance and 100° monitoring angle. There was a chanc e which was unstable under sunlight, but overcome this problem. By achieving t he 3m close-distance welding, it makes fire surveillance more rapid and more co rrect in wider range and more unstable of industrial circumstances. The response rate of UV/IR Flame Detector is faster and UV/IR Flame Detector i s stronger in high temperature than IR3 Flame Detector. It can be used with ma ximum function in laboratory, chemistry factory, painting room or engine test ro om.
    go to inquiry
  • list image

  • Ultraviolet and Infrared Hybrid Flame Detector 01
    There are two wavelength from UV and IR which is generated when the fire occ urs. If both sensors detect the wavelength, it means the fire breaks out then th e product’s transmitter forwards the signal and alarm. There are many factors w hich looks like the fire such as welding, halogen lamp, heat from stove and flam e of grinder. This product can choose whether the signal is real or not and mak e the fire surveillance more correct. Those are functions of 1st generation Flame Detector. 3rd generation Flame Det ector is release currently. With visible light sensor, high quality digital Light Lux feature(automated brightness control) and embedded high quality digital tempe rature sensor(in case of malfunction in high-temperature area), the monitoring area is enlarged to 50m distance and 100° monitoring angle, in comparison to o riginal feature, 30m or 50m distance and 100° monitoring angle. There was a c hance which was unstable under sunlight, but overcome this problem. By achiev ing the 3m close-distance welding, it makes fire surveillance more rapid and mo re correct in wider range and more unstable of industrial circumstances. The response rate of UV/IR Flame Detector is faster and UV/IR Flame Detector i s stronger in high temperature than IR3 Flame Detector. It can be used with ma ximum function in laboratory, chemistry factory, painting room or engine test ro om.
    go to inquiry
  • list image

  • Triple infrared flame detector
    There are 3 infrared rays sensors which observe the wavelength before and afte r the fire. Then they read the infrared rays’ wavelengths assorted by the range of it and analyze whether the fire is real or not. Because they forward the calcul ating result came from the three signals, it is possible to expedite the alarm. Th ere are many factors which looks like the fire such as welding, halogen lamp, he at from stove and flame of grinder. This product can choose whether the signal is real or not and make the fire surveillance more correct. Those are functions of 1st generation Flame Detector. 3rd generation Flame Det ector is release currently. With visible light sensor, high quality digital Light Lux feature(automated brightness control) and embedded high quality digital tempe rature sensor(in case of malfunction in high-temperature area), the monitoring area is enlarged to 30m or 50m distance and 100° monitoring angle, in compari son to original feature, 50m distance and 90° monitoring angle. By achieving th e 3m close-distance welding, it makes fire surveillance more rapid and more cor rect in wider range and more unstable of industrial circumstances regardless of i ndoor area or outdoor. IR3 Flame Detector has stronger properties at welding and outdoors area. It ca n be used with maximum function in petrochemical plant, offshore plant, woode n building(cultural assets), steelworks, ship building site and general manufactu ring facility.
    go to inquiry
  • list image

  • ANALOGUE TYPE HEAT DETECTOR
    * MODEL NO. : HD1014M * KFEIC APPROVAL LISTING NO. : GAM17-37 * CLASS : ANALOGUE * RATED VOLTAGE : DC 24V * CONTACT RATING CURRENT : NORMAL - 750㎂, CONTACT - 1200㎂ * AMBIENT CONDITION : -10℃ TO 50℃, MAX. 85RH * OPERATING INDICATOR : INTERNAL LED-RED COLOR * OPERATING TEMPERATURE : 30℃ ~ 90℃ * DIMENSION : ¢115mm x 48mm(INCLUD
    go to inquiry
  • list image

  • PHOTO ELECTRIC ANALOGUE TYPE SMOKE DETECTOR
    *MODEL NO. : HD1015M * KFEIC APPROVAL LISTING NO. : GAM17-36 *CLASS : ANALOGUE * RATED VOLTAGE : DC 24V * CONTACT RATING CURRENT : NORMAL - 750㎂, CONTACT - 1200㎂ *AMBIENT CONDITION : -10℃ TO 50℃, MAX. 85RH * OPERATING INDICATOR : INTERNAL LED-RED COLOR * OPERATING SMOKE DENSITY : 3 ~ 18 * DIMENSION : ¢115mm x 48mm(INCLUD
    go to inquiry
  • list image

  • RATE OF RISE HEAT DETECTOR
    * MODEL NO. : HD1081 * KFEIC APPROVAL LISTING NO. : GAM09-18 * CLASS : 2nd CLASS * RATED VOLTAGE : DC 24V(±20) * CONTACT RATING CURRENT : NORMAL - LESS THAN 25㎂, ALARM - 50mA * AMBIENT CONDITION : -10℃ TO 50℃, MAX. 85RH * OPERATING INDICATOR :
    go to inquiry
  • list image

  • PHOTO- ELECTRIC SMOKE DETECTOR
    * MODEL NO. : HD1003 * KFEIC APPROVAL LISTING NO. : GAM09-22 * CLASS : 2nd CLASS * RATED VOLTAGE : DC 24V(±20) * CONTACT RATING CURRENT : NORMAL - LESS THAN 80㎂ CONTACT - 50mA * AMBIENT CONDITION : -10℃ TO 50℃, MAX. 85RH * OPERATING INDICATOR : INTERNAL LED-RED COLOR * DIMENSION : ¢105mm x 50mm(INCLUDING BASE) * WEIGHT : APPROX 119g(INCLUDING BASE) * MATERIAL : P
    go to inquiry
  • list image

  • WIRELESS Fire Detector
    * MODEL NO. : WS1001 , WS1002 , WS1003 * KFEIC APPROVAL LISTING NO. : Is being prepared. * RATED VOLTAGE : DC 9V BELOW * TRANSIMIT POWER : 10 mW BELOW * RATED VOLTAGE : 30mA * TRANSMISSION DISTANCE : 50m~1,000m (Depending on environmental conditions.)
    go to inquiry
  • go list